Free US Shipping $50+

HAPPY HOLIDAZE

20% OFF Chill Steel Pipes
15% OFF Site-Wide*

DAZE

Product Spotlight: The Hyer Big-E Rig

Hyer Big-E Rig w. Higher Standards Water Pipe

If you’re sick & tired of using a dangerous butane torch to dab your wax concentrates, or perhaps too scared to even start, the Hyer Big-E Rig will be your godsend! The Big-E Rig provides total control over your wax concentrates, far & away outperforming torch-based dabbing with all of the perks and none of the downsides. By creating a device that attaches to your own glass bong or dab rig, the Big- E provides much better water filtration than the standard size enail.

As the smoking industry continues to expand, companies are creating new and incredible forms of technology to advance our smoking capabilities. The Hyer Big-E is an example of just how advanced the world of dabbing is becoming. Over thirty prototypes were tested and thrown aside during the production of this eNail, a testament to the advanced design and user-friendly nature of the Hyer Big-E Rig. 

Innovative Design:

The Hyer Big-E Rig is essentially just a ceramic heating element that hooks up to your current glass bong or dab rig setup. It has an easy-to-hold base that can accommodate 90% of all flat-based glass rigs, including both flared base & beaker bottom bongs. The Big-E docking station measures about 6” inches across and can fit water pipes as small as 3.5” inches and as large as 5.5” inches in diameter. The top of the base is outfitted with an elastomeric traction gripping system to ensure your glass stays put, even when you’re on the move!

Hyer Big-E eNail with Cheech & Chong Dab Rig

One of the best things about this smoking tool is its freestyle handling. The Hyer Big-E Rig does not need to be attached to the wall to work; in fact, it’s actually cordless and has the largest available battery power for currently existent e-nails. Using it’s 48W of portable power, the Big-E can be used for up to 2 hours, or approximately 25 sessions straight, without the need to stop & recharge.

The Hyer Big-E Rig also allows you to customize each smoking session to match your preferences! If you’re chilling with your friends, you can adjust the length of each session making continuous use more efficient. You can also adjust the temperature of each session using the device’s 10-bit ADC temperature sensing mechanism. This advanced heating equipment can maintain temperatures that are much more reliable than a torch, making your dabs more consistent, smooth & flavorful.

Precision Temperature Control:

The Hyer Big-E uses a non-porous quartz glass vaporizing component, allowing the temperature to reach a 750°F within 90 seconds (assuming its being used at room temperature). Device temperature can be fully controlled by the user and set from anywhere between 320°F-825°F, a huge range for experimenting with the different potency levels & flavor profiles of your concentrates. For a more flavorful dab, set the device temperature lower for a longer-lasting, smooth rip. For a quick, more intense rip, set the temperature higher. If you’d like an ideal mix of vapor production and quality taste, we found the Hyer Big-E Rig to operate best between 345°F-400°F.

Hyer Big-E Rig

Dabbing with a torch just can't compete with the level of precision temperature control provided by the Big-E Rig. The ceramic heater will heat up about 10°F per second, and the Hyer Big-E will vibrate when it’s reached your desired dabbing temp! Your settings will be stabilized as well, meaning the temperature you choose is the temperature you’ll be dabbing at the entirety of each rip.

The heating element is made of heat-resistant components including high-grade ceramic and a 100% quartz dish so the vapor from your wax concentrates always remains uncontaminated. The heating element is fit with a removable 30W ceramic heater, making it much easier to take apart for cleaning purposes. The Hyer Big-E base was designed to be lightweight yet sturdy, containing a safety sensor that will disable its ability to heat the quartz glass if knocked over. Put an end to the fear of knocking over your torch over and lighting yourself on fire with the Big-E Rig! 

Stand Out Features on the Hyer Big-E Rig:

  • Vibrating functionality will keep you posted on when the unit is ready to rip!
  • A built-in wax storage compartment on the docking station makes it even easier to carry & store your goodies!  
  • Micro-USB charging port on the back allows for charging your smartphone and other compatible devices right from the base!
  • The self-cleaning mode makes maintenance and upkeep of your e-nail much faster & easier.
  • Unlike torches, the Hyer Big-E Rig is entirely combustion-free! Therefore, your hits will never contain any potentially harmful particles.
  • Clear display screen shows current temperature and number of sessions left on the battery before needing to charge.
  • Smart LED light sensor informs you what mode the device is in (heating, ready to hit, or cleaning).
  • Lightweight & portable--the device itself weighs less than 2lbs!
  • No more wasted money on torches or butane tanks!
  • Extremely easy to use!

Setting Up the Big-E Rig:

Start by attaching and securing the bottom of your selected water pipe to the Hyer Big-E base, which features rubber ribs for padding. You will do so by utilizing the knob on the side of the base adjust the clamp to your glass as needed.

As mentioned previously, the adjustable clamp is compatible with 90% of all flat-based glass rigs including straight tube water pipes and beaker bongs. The smallest pipe it will fit can have a base width of 3.5” inches, while the largest it can fit is up to 5.5” inches wide. As you twist the knob clockwise or counterclockwise, the clamps adjust to secure your rig firmly in place. The Hyer Big-E Rig features rubber buffers on the clamps that will properly secure your glass without doing any damage as you tighten.

Grav Upline Water Pipe on Hyer Big-E RigOnce your glass pipe is securely attached to the Hyer Docking Station, you can now connect the provided quartz nail to the joint of your chosen water pipe/dab rig. The heating element is held in place by rubber O-rings within the banger, just below the nail. Each of the bangers included with the Hyer Big-E have this unique female adapter made specifically for fitting the heating element inside and right below the nail. Then plug the heating element cable into the port on the side of the docking station and your setup is complete! (You’ll want to attach your glass pipe so that the banger is just above this port that way the cable can reach).

The Hyer Big-E Rig comes with a variety of accessories & adapters to convert any standard joint size or gender to ensure the heating element fits properly. The box contains everything you'll need to convert your current glass pipe into a torch-less dab rig as well as some extra dabbing tools. This includes:

  • The Hyer Big-E Docking Station
  • 30W Removable Ceramic Heating Element
  • 14mm Female Adapter Banger
  • 14mm Male Adapter Banger
  • 14mm-to-18mm Female Adapter
  • Smart Switch Charging Cable
  • 4 x 330mAh Li-ion Batteries
  • USB-C Charging Cable
  • Quartz Carb Cap Tool
  • Hyer Dab mat

How to Use the Hyer Big-E Rig:

To begin dabbing, use the power button to turn the base on. Then, use the “+/-” symbols to select your desired temperature and hit the power button once again to begin the heating process. Holding the "+" or "-" button down will change temperatures in increments of 10° and the screen will display the changes in real time. Once the LED light indicates the device has heated to your desired temperature, place a dab of your wax concentrates on the banger and enjoy precision dabbing done right!

Hyer Big-E Rig

When you’re done with each session, you can run the unique cleaning cycle of the Hyer Big-E Rig. This ultimately heats the nail to extreme temperatures to burn off excess remains of your concentrates. When the device is cooled, you can remove the 30W ceramic heater from the banger to do a more detailed cleaning of the separate pieces if you wish. We recommend isopropyl alcohol or ResRemover pouches as a cleaning solution each of the individual parts included with the Big-E. 

The Hyer Big-E is really easy to use in any location. It’s not the smallest piece, so using it in-house is probably the most convenient; however as mentioned, it is portable! Being glass and having fragile components, we recommend you store and protect it well for transportation purposes and in its general downtime. Regardless of size, you’ll no longer need to travel with a torch or stay plugged in while dabbing on-the-go with the Hyer Big-E Rig!

It’s Time to Get Hyer!

You may find yourself unboxing your new e-nail and questioning what you just got yourself into, but don’t fear—after a small learning curve this user-friendly device is guaranteed to enhance your world of dabbing. Much cleaner, safer & more efficient than using a standard torch and glass dab rig, the Hyer Big-E Rig has effectively revolutionized the art of smoking wax concentrates. Click here to get your very own Hyer Big-E Rig today and start enjoying your dabs the right way!

    Leave a comment

    Please note: comments must be approved before they are published.